SECTION
Preparing the Joystick for Use
NOTE: For this procedure, refer to FIGURE 5.9.
NOTE: The joystick is factory installed on the right side of the wheelchair. To reposition the joystick onto the left side of the wheelchair, refer to Repositioning the Joystick on page 40.
1.Turn the adjustment lock lever to release the adjustment lock from joystick mounting tube.
2.Slide joystick mounting tube to the desired position.
3.Turn the adjustment lock lever to secure the adjustment lock to the joystick mounting tube.
NOTE: Joystick not shown.
Joystick Mounting
Tube
Adjustment
Lock Lever
FIGURE 5.9 Preparing the Joystick for Use
Repositioning the Joystick
ASBA Seat Model
NOTE: For this procedure, refer to FIGURE 5.10 on page 41.
1.Turn the adjustment lock lever to release the joystick mounting tube from the mounting bracket.
2.Remove the joystick from the wheelchair.
3.Remove the three hex screws that secure both halves of the mounting bracket to the arm tube.
4.Reposition mounting bracket on opposite arm tube ensuring the threaded plate of the mounting bracket is on the inside of the arm tube as shown in FIGURE 5.10.
5.Using the three hex mounting screws and washers, secure both halves of the mounting bracket to the arm tube.
6.Slide the joystick mounting tube through the mounting bracket to the desired position.
7.Turn the adjustment lock lever to secure the joystick mounting tube into the mounting bracket.
Pronto® M94™ | 40 | Part No. 1122145 |
