SECTION
A Note to Wheelchair Assistants
When assistance to the wheelchair user is required, remember to use good body mechanics. Keep your back straight and bend your knees whenever tilting wheelchair or traversing curbs or other impediments.
Also, be aware of detachable parts such as arms or legrests. These must NEVER be used to move the wheelchair or as lifting supports, as they may be inadvertently released, resulting in possible injury to the user and/or assistant(s).
When learning a new assistance technique, have an experienced assistant help you before attempting it alone.
Lifting/Stairways
WARNING
DO NOT attempt to move an occupied power wheelchair between floors using a stairway. Use an elevator to move an occupied power wheelchair between floors. If moving a power wheelchair between floors by means of a stairway, the occupant MUST be removed and transported independently of the power wheelchair.
Ensure that driving surfaces, ramps, lifts, elevators, etc. are capable of supporting combined weight of user and wheelchair (for a 500 lbs user, the combined weight could be up to 800 lbs).
Extreme caution is advised when it is necessary to move an unoccupied power wheelchair up or down the stairs. Invacare recommends using two assistants and making thorough preparations.
Use ONLY secure, nondetachable parts for
It is strongly recommended to lift the wheelchair only by the rear frame and the front forks - otherwise injury or damage may occur.
DO NOT attempt to lift the wheelchair by any removable (detachable) parts. Lifting by means of any removable (detachable) parts of a wheelchair may result in injury to the user or damage to the wheelchair.
Pinch point exists between head tube cap and walking beam.
The weight of the wheelchair with batteries and without the user is 290 lbs. Use proper lifting techniques (lift with your legs) to avoid injury.
NOTE: For this procedure, refer to FIGURE 3.2 on page 20.
Follow this procedure for moving the wheelchair between floors when an elevator is not available or lifting the wheelchair is necessary:
NOTE: When using a stairway to move the wheelchair, seat and any accessories, move all wheelchair components away from the stairway prior to reassembly.
1.Remove the occupant from the wheelchair.
2.Remove the seat. Refer to Removing/Installing the Seat Assembly on page 50.
Part No. 1122145 | 19 | Pronto® M94™ |
