SECTION
|
| POSITIVE (+) |
NEGATIVE |
| Battery Cable, |
| Mounting Screw with | |
Battery Cable |
| |
| Fuse Hardware | |
|
| |
| Nut |
|
NEGATIVE |
| |
|
| |
Battery Terminal |
|
|
Mounting |
|
|
Screw |
| Locknut |
|
| |
| Battery | POSITIVE (+) |
| Battery Terminal | |
|
|
FIGURE 11.3 Connecting/Disconnecting the Battery Wiring Harness
Charging Batteries
WARNING
Never attempt to recharge the batteries by attaching cables directly to the battery terminals.
DO NOT attempt to recharge the batteries and operate the wheelchair at the same time.
DO NOT attempt to recharge the batteries when the wheelchair has been exposed to ANY type of moisture.
DO NOT attempt to recharge the batteries when the wheelchair is outside.
DO NOT sit in the wheelchair while charging the batteries.
DO NOT attempt to recharge the batteries using both the
READ and CAREFULLY follow the manufactures instructions for each charger (supplied or purchased). If charging instructions are not supplied, consult a qualified technician for proper procedures prior to use.
CAUTION
New batteries MUST be fully charged prior to initial use of the wheelchair.
Always fully charge new batteries before initial use or battery life will be reduced.
Pronto® M94™ | 74 | Part No. 1122145 |