Invacare Pronto M71 manual Independent Charger, Charger Programming Port

SECTION 11—BATTERIES

Independent Charger

NOTE: The charger port located on the Front of the joystick requires the use of an independent charger. The independent charger is not supplied with the wheelchair.

NOTE: For this procedure, refer to FIGURE 11.7.

WARNING

READ and CAREFULLY follow the individual instructions for each charger (supplied or purchased). If charging instructions are not supplied, consult a qualified technician for proper procedures.

CAUTION

DO NOT use an independent charger with an output rating of over 8A (amps). Oth- erwise, damage may occur.

Required Items: Battery Charger*, Power Cord**

*NOTE: Item not supplied.

**NOTE: AC power cord (3-prong plug, 15 ampere current rating; industrial type).

1.Attach the battery charger connector to the charger port on the front of the joystick.

2.Plug the charger’s AC power cord or extension into the grounded 110-volt wall outlet.

3.Unplug the AC power cord or extension once charging is complete.

SPJ+ Joysticks

Charger/

Programming

Port

MPJ+ Joystick

Charger/Programming Port (On Front of Joystick)

FIGURE 11.7 Independent Charger

Pronto® M94™ 78 Part No. 1122145