SECTION
DETAIL “A” -
SEAT ASSEMBLY
Seat Assembly
Seat Frame
Seat
Positioning
Strap
Washer
Mounting Screws
| DETAIL “B” - SEAT POSITIONS |
|
| Bottom View of Seat Assembly |
|
* DO NOT Use | Front of Seat | * DO NOT Use |
Use these Mounting Holes for
Use these Mounting Holes for Standard Seat Position
* DO NOT Use
Use these Mounting Holes for
Use these Mounting Holes for Standard Seat Position
| Use these Mounting Holes | |
DO NOT Use | for | |
these mounting | Use these Mounting Holes | |
holes. | ||
for Standard Seat Position | ||
| ||
| * DO NOT Use | |
| Use these Mounting Holes for | |
|
Use these Mounting Holes for Standard Seat Position
Rear of Seat
*NOTE: Only the
FIGURE 7.6 Adjusting Seat Position on Seat Frame
Adjusting Seat Depth - Van Seat Only
NOTE: For this procedure, refer to FIGURE 7.7 on page 54.
1.Remove the seat. Refer to Removing/Installing the Seat Assembly on page 50.
2.Remove the seat base from the seat assembly. Refer to Adjusting Seat Position on Seat Frame on page 52.
3.Remove the six mounting screws located under the seat that secure the seat back assembly in place.
Part No. 1122145 | 53 | Pronto® M94™ |