SECTION
Depth
NOTE: For this procedure, refer to FIGURE 8.3.
1.Remove the quick release pin that secures the footboard assembly to the wheelchair frame.
WARNING
Make sure the detent balls of the
Keep detent balls clean.
2.Adjust footboard to one of three mounting positions.
3.Install the quick release pin. Make sure the detent balls are fully released beyond the outer edge of the tube (Detail “A” of FIGURE 8.3).
Mounting | Wheelchair Frame |
Hole |
|
Three
Depth
Adjustment
Holes
Quick | Detent | |
Release | ||
Ball | ||
Pin | ||
|
Footboard
Assembly
Detail “A” - Bottom View of
Footboard
Quick Release Pin
Outer Edge |
|
| Detent Balls |
of Tube |
|
| |
|
|
|
FIGURE 8.3 Adjusting the Footboard Assembly - Depth
Pronto® M94™ | 58 | Part No. 1122145 |