SECTION
| Locknuts | |
Hex Mounting Screws | Arm Frame | |
| ||
Adjustment | Spacers | |
Joystick Mounting Tube | ||
Lock Lever | ||
|
Mounting
Bracket
FIGURE 5.11 Repositioning the Joystick - Van Seat Model
Disconnecting/Connecting the Joysticks
NOTE: For this procedure, refer to FIGURE 5.12.
NOTE: The joystick connector is located at the rear of the seat frame.
SPJ+ Joysticks
Disconnecting
1.Loosen the thumb screws on the joystick connector.
2.Disconnect the joystick connector from the controller connector.
Connecting
1.Align the joystick connector with the controller connector.
2.Secure the joystick connector to the controller connector using the thumb screws on the controller connector.
WARNING
The excess joystick cable must be coiled, and
3.If necessary, coil and tie wrap excess joystick cable to rear of seat frame.
Light Grey Collar
Joystick | Controller | |
Connector | ||
Connector | ||
|
FIGURE 5.12 Disconnecting/Connecting the Joysticks - SPJ+ Joysticks
Pronto® M94™ | 42 | Part No. 1122145 |