SECTION
DETAIL“A” - BATTERIES WITH
LIFTING STRAPS
DETAIL“B” - BATTERIES WITHOUT
Battery Lifting Straps
Rear
Battery
Straps
Front
BatteryBattery
Tray
Battery Battery
Terminals/Posts
FIGURE 11.1 Installing/Removing the Batteries
9.Connect the front battery to the controller (RED connector). Refer to FIGURE 11.2.
10.Connect the rear battery to the front battery (RED and BLACK connectors). Refer to FIGURE 11.2.
11.Reinstall the top shroud. Refer to Removing/Installing the Shrouds on page 65.
12.Reinstall the seat. Refer to Removing/Installing the Seat Assembly on page 50.
13.Connect the joystick. Refer to Disconnecting/Connecting the Joysticks on page 42.
NOTE: New battery(ies) MUST be fully charged before using, otherwise the life of the battery(ies) will be reduced.
14. If necessary, charge the battery(ies). Refer to Charging Batteries on page 74.
Connector from | Front of Wheelchair | RED Controller Connector |
Battery to Controller |
| |
| (Not Shown) | |
|
| |
Front Battery |
| BLACK Front NEGATIVE |
Tie Wrap |
| Battery Terminal Mounting |
| Screw, Nut and Fuse Hardware | |
|
| |
RED Front POSITIVE (+) |
| (Terminal Cap Shown) |
Battery Terminal Mounting |
| Tie Wrap |
|
| |
Screw, Nut and Fuse Hardware |
| BLACK Battery |
(Terminal Cap Shown) |
| |
|
| |
RED Battery Connectors |
| GREY Rear NEGATIVE |
| Battery Terminal Mounting | |
|
| |
RED Rear POSITIVE (+) Battery |
| Screw, Nut and Fuse Hardware* |
|
| |
Terminal Mounting Screw, Nut |
|
|
and Fuse Hardware* | Rear of Wheelchair | Rear Battery |
*NOTE: Terminal cap shown removed for clarity. | Retaining Strap |
FIGURE 11.2 Installing/Removing the Batteries
Part No. 1122145 | 71 | Pronto® M94™ |