PLUS Vision M-5 (4) Mount the upper and lower brackets using M4 x 12 screws., (3) Attach the marker tray to the Copyboard.

14
3
1
2
3
M4⳯12 screws
Lower bracket
Upper bracket (Left)
Upper bracket (Rightt)
M4⳯12 screws
M4⳯12 screws
Fixing knobs
Hexagon cap nuts
(4) Mount the upper and lower brackets using M4
x 12 screws.
•The left and right upper brackets are differ-
ent. Be sure to mount them on the proper
side.
•Both the lower brackets have the same
form, but mount them in the opposite di-
rections so that each is facing outwards.
(5) Hook the left and right upper brackets of the
Copyboard onto the upper crossbar and fas-
ten the lower brackets using the fixing knobs
and hexagon cap nuts.
CAUTION
•Lock the casters so that the stand does not move.
•When mounting and adjusting the height, at least
two people should hold the copyboard to prevent it
from dropping or tipping over, resulting in unex-
pected injury.
Marker tray
Side covers
(3) Attach the marker tray to the Copyboard.
햲Insert the side covers into both ends of the marker
tray.
•Note that there are left and right type side covers.
햳Temporarily fasten the three M4 x 8 screws into the
Copyboard (leaving about 3 mm)
•Use the supplied screwdriver.
햴Insert the marker tray over the 3 screws that have
been temporarily fastened, and then tighten securely.
•Please insert the marker tray as far as they will
go.
M4 x 8 screws