39
Windows Me / 2000/ XP Personal Computer and USB Connections
Setup of the driver is not required when USB connections are made between Windows Me / 2000 / XP personal
computers and the Copyboard. When the Copyboard is first connected to the personal computer, the driver is installed
automatically.

Connect the Copyboard with the personal

computer.

Connect the USB connector of the Copyboard with that
of the personal computer using a USB cable and then
press the POWER button of the Copyboard to switch
on the power.
Windows standard driver will be installed automatically.
Note: For Windows ME, the operating system’s CD-
ROM or floppy disk may be requested.

Check whether the Copyboard is operating properly.

햲Right click [My Computer], then click on [Properties] of the
menu to open the [System Properties] screen.
•When using Windows XP, right click [My Computer] on
the [Start] menu and click [Management].
햳Click the tab of the Device Manager to switch to the [Device
Manager] screen.
햴Click [+] located to the left of [Disc Drive] and check that the
driver name described at the right is displayed.
1
2
3