9
Read This Before Installing

WARNINGS

•Be sure to install and assemble the copyboard as instructed in this manual. Improper installation or assembly
could lead to injury.
•At least two people should hold the copyboard when installing and removing it.
•To prevent the copyboard from falling off the wall, install the copyboard on a sufficiently strong surface and in
such a way that the weight of both the copyboard and the mounting hardware can be supported for an extended
period of time, even in earthquakes. Improper installation could lead to the copyboard falling and causing injury.
•Use M6 screws or the equivalent to fix the copyboard to the wall. If any other screws are used, the copyboard
could fall, causing injury.
• Install on a wall surface reinforced by sturdy studs.
•When installing on a concrete wall, use anchor nuts and anchor bolts.

Types of Installation

On a wall (horizontal or vertical)

Horizontal Position:
Use the wall mount fittings included with the copyboard to mount the
unit directly on the wall. The copyboard can be installed in the horizon-
tal direction.
Vertical Position:
Use of the vertical wall mounting kit allows the Copyboard to be in-
stalled in the vertical orientation. (Vertical wall mounting kit: Model M-
5- W, order code 44-563)

On a stand (horizontal or vertical)

Mount the copyboard on an optional stand for mobility. The copyboard
can be mounted in either the horizontal or vertical position. (Stand Kit
: Model M-5-T, order code: 44-562)

On a partition-Panel

Use an optional partition mount kit to hang the copyboard onto a par-
tition panel. (Partition hanger Kit : Model M-5-P, order code: 44-552)

Cautions on Installation