Menu Operation Method
Performing Menu Operations
•Only “Setup”, “Options” and “Info.” can be selected when no signal is being input.
•The menu display will close if, after pressing a button, the next button operation is not made within 30 seconds.
•The adjustment and the setting values are stored even when the power is switched off or the plug is disconnected from the power outlet.
(Note that some items are not stored.)
Preparation
Switch on the power of the connected equipment, start the play operation or another operation, and input the signal to the projector.
Select the input that you wish to adjust.
The menu display of the description diagram depicts an example in which the “Keystone” item name is selected.
Menu Display
1 Press the MENU button to display the menu
STANDBY |
| LASER |
RGB | VIDEO | AUTO |
MENU |
| QUICK |
|
| Q |
ENTER |
| |
| CANCEL | |
FREEZE | MUTE | TIMER |
The menu name that existed when the menu was closed previously will be displayed.
Selection of the Menu Name
2 Press the SELECT () button to select the menu name
STANDBY | LASER |
RGB VIDEO | AUTO |
MENU | QUICK |
| Q |
ENTERCANCEL
FREEZE MUTE TIMER
Each press of the SELECT button advances the selection one step in the sequence of “Color” → “View” → “Setup” → “Option” → “Info.” → “Image”. Each press of the SELECT button causes a return of one step.
The cursor moves to the selected menu name.
Note:
Please check that the cursor of the item name has disappeared at the time of menu name selection.
Press the CANCEL button to make the cursor disappear.
