Image
•Perform this operation while projecting the picture for which the adjustment/setting will be made.
•Select the menu name “Image”.
See “Menu Operation Method” on Page
Brightness / Contrast / Color / Tint / Sharpness
Picture qualities such as brightness and contrast will change depend- ing on the whether the room is bright or dark. Please adjust to suit your preference.
Select the desired item name and then adjust with the SELECT () buttons.
Item Name | SELECT ◀ Button | SELECT ▶ Button |
Brightness | Darker | Brighter |
Contrast | Less contrast | More contrast |
Color | Less dense color | Denser color |
Tint | More red | More green |
Sharpness | Softer image | Sharper image |
|
|
|
Note:
* The adjustment values of the adjustable items are stored according to input source. * “Tint” can only be adjusted when inputting NTSC
component signals.
Picture Adj. / Fine Picture / H Position / V Position
Usually, automatic adjustment is performed at the time of signal selec- tion, but when automatic adjustment is not effective, these adjustments can be performed.
Note:
When the image extends beyond the boundaries of the screen or is smaller than the screen, check that the “View” → “Aspect” setting is set to “Auto”. See “Aspect” on Page
Picture Adj. (Picture Adjustment)
Adjust this when bright and dark vertical bands appear on the screen.
Select the “Picture Adj.” item name and adjust with the SELECT () buttons so that the vertical bands disappear and brightness becomes uniform across the screen.
