Transfer Data

Use ready-made strenght training exercises or add your own strenght training exercises in polarpersonaltrainer.com and transfer those to your FT80 to guide your strength training session. After training session(s), follow-up easily your fitness level development by transferring training data from FT80 to polarpersonaltrainer.com. The first time follow carefully instructions:

1.Transfer strength training workouts to your FT80:

1.Register in polarpersonaltrainer.com.

2.Follow the instructions on your computer screen to download and install the WebSync data transfer software onto your computer.

If you have already registered, but not downloaded WebSync, download it in polarpersonaltrainer.com -> downloads and follow the installation wizard.

ENGLISH

3.Plug in the FlowLink cable to the USB port on your computer.

4.Place your FT80 on the FlowLink facing down.

5.Follow the data transfer process from the WebSync software on your computer screen. See polarpersonaltrainer.com "Help" for further instructions on data transfer.

2.Transfer training data from FT80 to your diary in polarpersonaltrainer.com

1.Open the Web Sync data transfer software onto your computer.

2.Plug in the FlowLink cable onto the USB port onto your computer.

3.Place your FT80 on the FlowLink facing down.

4.Follow the data transfer from your FT80 onto polarpersonaltrainer.com on your computer screen. See polarpersonaltrainer.com "Help" for further instructions.

After Training

13

Page 13
Image 13
Polar manual Transfer Data, Transfer strength training workouts to your FT80