Polar FT80 manual Manufacturer to determine safety in your case

manufacturer to determine safety in your case.

If you are allergic to any substance that comes into contact with your skin or if you suspect an allergic reaction due to using the product, check the listed materials in Technical Specifications. To avoid any skin reaction to the heart rate sensor, wear it over a shirt, but moisten the shirt well under the electrodes to ensure flawless operation.

The combined impact of moisture and intense abrasion may cause a black color to come off the heart rate sensor’s surface, possibly staining light-colored clothes. If you use perfume or insect repellent on your skin, you must ensure that it does not come into contact with the training computer or the heart rate sensor.

Training equipment with electronic components may cause interfering stray signals. To tackle these problems, try the following:

1.Remove the heart rate sensor from your chest and use the training equipment as you would normally.

ENGLISH

2.Move the wrist unit around until you find an area in which it displays no stray reading or does not flash the heart symbol.

Interference is often worst right in front of the display panel of the equipment, while the left or right side of the display is relatively free of disturbance.

3.Put the heart rate sensor back on your chest and keep the wrist unit in this interference-free area as much as possible.

If the FT80 still does not work, the piece of equipment may be electrically too noisy for wireless heart rate measurement.

FT80 may be worn when swimming. To maintain water resistance, do not press

buttons under water. For more information, visit http://www.polar.com/support.

Important Information 19