4 Secure the film with the two magnets provided, on the top and bottom edges. Be sure the magnets are also within the raised ridges.
LOCK
UNLOCK
5Place the adapter in the 4x5 carrier, sliding the notches into the pins on the left edge. The film and magnets should be face up, as shown.
6Close the carrier. Squeeze the carrier at the bottom edge and turn the knob to lock it.
The Single-35mm Carrier
1Open the 4x5 carrier as described previously.
2Locate the
Note: You can use a negative, or a mounted or unmounted slide.
3Orient the adapter so the metal tabs face up, and the notches are at the left edge. Slide the film into the channel, under the two metal tabs. Position the film so the image is right- reading and
English 12
