Our products have been configured for DDNS services.To use DDNS:
1.Log into the camera, click
2.SelectThird Party DDNS.This domain will be provided by aThird Party DDNS provider, such as DynDNS, Oray, 3322, etc. (You must have an account that must be registered on the web.To register your DDNS account, go to: www.dyndns.org) Select your provider and complete your DDNS user name, password and host name.
3.You must change the camera’s http port number from its default port number of 80.You can change it, for example, to 100, 8090, etc. Click “OK” and wait about 30 seconds for the camera to reboot. Make sure the Subnet Mask, Gateway and DNS Server numbers are the same as the ones on your router.
4.Set Port Forwarding in the router.
You need to fill in the DDNS and port. When you are logged on to the IP Camera tool you can also find the DDNS server settings via the Device Status screen. For example: http://polaroidsafety.com:8999/ .The browser will take you to IP camera login page.
Type the device’s User name and password in the login box to log into the equipment.
If you type in the domain name but you are not able to open the IP camera in the browser, you will receive an error message, as shown in the image below.
You must then check the status of the IP camera on the local area network, confirm that UPnP is functioning and DDNS is successful.
22 | IP100 Manual | 23 |
| ||
|
|
|
