Polaroid IP100 user manual Open the iPad browser Safari

To use UPnP to set the port mapping function successfully, first check to make sure your router’s UPNP setting is on. If the UPnP function is unavailable, refer to the user manual for the router for details on how to enable the router’s UPnP setting.

If you useTP-LINK router, please refer to these instructions

In order to automatically allow your camera to utilize UPnP forwarding, input your router’s IP address in your browser (for example, http://192.168.1.1).You can locate the router’s IP address on the label on the router unit). Once logged into your router’s setting page, click on Forwarding > UPnP, to make sure UPnP is enabled (see diagram below).

Note:You must match the camera’s settings to those of your router. If you are using aTP-LINK router, please refer to the router’s user manual. Make sure the “Obtain IP from DHCP Server” box is checked and the UPnP is enabled.To manually set the port forwarding in your router, log into the router and select the “Forwarding” option. Click the “Add New” button and provide the service port number and IP address of the camera.

6 Accessing your IP camera via mobile devices - mobile phone, iPad, etc.

There are two ways to access the IP camera through your mobile device. One is to type the camera’s IP address directly in your browser (IP address or DDNS).

6.1Inputting the IP address in your mobile device browser – See the below examples of several popular mobile devices.

iPAD

Open the iPad browser (Safari)

Type in the IP camera’s IP address. For example: http://c0001.topipcam.org;8999

24 IP100 Manual 25