4.The camera’s IP Address can be changed, but it should always be the same IP address as your computer’s subnet.
This is the DNS Server address which is provided by the network server.
In Windows, you can perform a ping test to make sure the IP camera is properly connected and functioning. In the CMD window, which can be accessed
in Windows 7 by clinking on the Start icon, then on All Programs, then on Accessories, and finally on Command Prompt, or by simply entering the letters cmd in the search field and pressing Enter, type or copy in: ping 192.168.1.111.
If you are able to ping the IP camera, that means the IP camera is working properly and connected correctly.
3.2 Software installation
Software installation:
The IP camera system software is very easy to install via the installation program.
Insert the CD into your computer’s CD drive.The CD will automatically run the software installation of the IP camera user interface (IPCamSetup). Note: If the CD does not run automatically, you will need to access the CD drive and double- click on IPCamSetup. Follow the steps to install the software.
If the IP camera software interface does not appear, click “autorun.exe” on the
CD. Then locate “search.exe” 
. Click and install the LANTool to your computer.You will then be able to see the “IP CameraTool” icon on your
computer’s desktop | . |
8 | IP100 Manual | 9 |
| ||
|
|
|
