-Send images to the FTP server, according to the interval set for sending images.
Alarm Scheduler – Using the scheduler, you decide when you want your camera to alarm.You can set the alarm schedule according to days of the week, hours in a day, and even by quarter hours. On the Scheduler, you can easily click on the times you want the camera armed (the section selected will turn blue to indicate your times). Click again to undo your schedule, and the field will return to its original gray (blank). If you do not use the scheduler, the camera will alarm any time motion is detected.
Alarm Scheduler
Motion Detect Armed - When you enable Motion Detect Armed, the camera can be triggered to send email alerts and record images. On the Device Status indicator on the camera monitoring page, the green icon becomes red and an alert will sound.
Motion Detect Sensitivity
Send Mail on Alarm – When you check on the “Send Mail on Alarm” box, you enable this function and an email with a picture will automatically be sent if an
alarm is triggered. Make sure your Mail Service Settings are correct.
Upload Image on Alarm – When you check the “Upload Image on Alarm” box, you enable the function of having all images sent to your FTP file once the alarm is armed.You can set the intervals (in seconds) at which images are uploaded.
REC automatically and save to PC - When you enable motion detection and open the camera monitoring page on your computer, if an alarm is triggered, the camera will automatically start to record (REC) for several seconds and save the images to your computer.
50 | IP100 Manual | 51 |
| ||
|
|
|
