Polaroid LCD-2050 Name of each part, WTN-20A2, Main Power button LED indicator Remote Sensor

Name of each part Name of each part

Front Views for the WTN-20A2, WTN-20B2 and WTN-20C2	Rear View	Side View(Right)
WTN-20A2
POWER

MAIN POWER button

LED indicator

Remote Sensor

• Press MAIN POWER switch located on bottom/left side of TV. LED will turn red (Stand-by mode) or green (TV-on mode). The LED will turn off when power is turned off.

WTN-20B2/WTN-20C2

POWER LED indicator

•Press MAIN POWER switch located on bottom/left side of TV. LED will turn red (Stand-by mode) or green (TV-on mode). The LED will turn off when power is turned off.

•To change the vertical angle of the TV set, tilt the screen up to 5° forward or 15° backward.

The TV set can also be rotated 45° to left or right horizontally. Adjust the angle of the TV for comfortable viewing.

Remote Sensor

Stand-by mode uses minimal electricity!

The buttons on the side of the TV have the same functions as buttons used on the remote control. Use instructions are in the Remote Control section of this manual.

10 11