AC POWER CONNECTIONS AND SWITCHES | DSWmicroPRO1000 Amplifier |
Dual Voltage Switch
DSWmicroPRO Series subwoofers are equipped with a dual voltage switch. Be sure to confirm the voltage setting required in your country.
WARNING: The correct voltage for your country has been set at the factory. Only use the voltage setting specified for your country. Using an improper setting may damage your subwoofer. If you must switch voltage, take care to check the fuse value; replace with correct fuse value for the voltage setting that you’ve selected.
AC Main Power Switch
Turn power on/off via the AC MAIN switch.
3 Position Power Switch
Your DSWmicroPRO Series subwoofer uses a 3 position power switch, which allows you to select your subwoofer's operational mode:
12V (DSW2000/DSW3000/DSW4000)
With the switch in this position, your subwoofer will only turn on (become active) when a 12V signal is applied to the 12V input on the back of the amplifier or when the user presses the power button on the remote control. Once active the subwoofer will remain on regardless
of whether an audio signal is present.
Note: For the DSW1000, the remote control is used to turn the subwoofer ON/OFF with the switch in the “REMOTE” position. The DSW1000 does not have a 12V trigger option.
DSWmicroPRO2000, 3000, 4000 Amplifier
Audio Sense
With the switch in this position, your subwoofer automatically turns on when it senses an audio signal. The LED located on the back of the subwoofer will turn green. The subwoofer can also be turned on or off via the remote control.
We recommend this mode if your subwoofer is
always receiving power (i.e., if it’s plugged into a wall outlet). When no signal is present, the subwoofer will enter a “waiting” state after 15 minutes and the LED will turn yellow.
On
With the switch in this position, your subwoofer is always on and fully active. The LED on the back of the subwoofer will be green. This mode is best if the subwoofer is plugged into a switched power outlet. The remote control cannot be used to turn off the subwoofer.
Note: You may want to leave your subwoofer unplugged or the AC MAIN switch turned off during extended periods of non use, such as during a vacation.
Power Mode LED Colors and Their Meaning:
Green: Fully active
Yellow: Standby
Red: Protection
Customer Service Hours of Operation: | polkcs@polkaudio.com | 5 |
