Polycom 2300 Service profile / Ssid configuration, Set service-profile Voice ssid-name Voice

Configuration Guide

Service profile / SSID configuration

To create a SSID named Voice using WPA-PSK that will be advertised on 802.11a/b/g radios using CLI:

set service-profile Voice ssid-name Voice

#Creates a new service profile and SSID named Voice. Note it’s a best practice recommendation to use the same name for both the service profile and SSID

set service-profile Voice auth-fallthru last-resort

#Sets the authentication type to open authentication. With WPA-PSK the pre-shared key will be used to authenticate the handset.

set service-profile Voice wpa-ie enable

# Enables WPA security.

set service-profile Voice psk-phrase <enter-a- passphrase>

#Defines the passphrase required to access the SSID. set service-profile Voice auth-psk enable

#Enables pre-shared-key authentication.

set service-profile Voice auth-dot1x disable

# Disables 802.1x authentication.

set service-profile Voice attr vlan-name Voice

#Specifies the VLAN name to map the voice handsets traffic to.

To create a SSID named Voice using WPA2-PSK that will be advertised on 802.11a/b/g radios using CLI:

set service-profile Voice ssid-name Voice

#Creates a new service profile and SSID named Voice. Note it’s a best practice recommendation to use the same name for both the service profile and SSID

set service-profile Voice auth-fallthru last-resort

#Sets the authentication type to open authentication. With WPA-PSK the pre-shared key will be used to authenticate the handset.

set service-profile Voice rsn-ie enable

# Enables WPA2 security.

set service-profile Voice cipher-tkip disable

# Disables TKIP encryption.

set service-profile Voice cipher-ccmp enable

# Enables AES/CCMP encryption.

set service-profile Voice psk-phrase <enter-a- passphrase>

#Defines the passphrase required to access the SSID. set service-profile Voice auth-psk enable

#Enables pre-shared-key authentication.

12 PN: 1725-36082-001_F.doc