Polycom 2300 manual Support SpectraLink 8000 Wireless Telephones using WPA2-PSK

Configuration Guide

set vlan 2 port 8 tag 2 set igmp disable vlan Voice

set interface 1 ip 192.168.1.50 255.255.255.0

set security acl ip SpectraLink permit cos 7 119 0.0.0.0 255.255.255.255 0.0.0.0 255.255.255.255

set security acl ip SpectraLink permit 0.0.0.0 255.255.255.255

commit security acl SpectraLink

set security acl map SpectraLink vlan Voice in set security acl map SpectraLink vlan Voice out

	The following configuration file provides an example configuration to
	support SpectraLink 8000 Wireless Telephones using WPA2-PSK:
	# Configuration nvgen'd at 2007-7-26 22:53:41
	# Image 5.0.11.4.0
	# Model 2360
	# Last change occurred at 2007-7-26 22:53:34
	set ip route default 192.168.1.1 1
	set system name WSS2360
	set system ip-address 192.168.1.50
	set system countrycode US
	set timezone EST -5 0
	set service-profile Voice ssid-name Voice
	set service-profile Voice auth-fallthru last-resort
	set service-profile Voice rsn-ie enable
	set service-profile Voice cipher-tkip disable
	set service-profile Voice cipher-ccmp enable
	set service-profile Voice psk-phrase enter-a-passphrase
	set service-profile Voice auth-psk enable
	set service-profile Voice auth-dot1x disable
	set service-profile Voice attr vlan-name Voice
	set enablepass password enable-password
	set user admin password admin-password
	set radio-profile default service-profile Voice
	set radio-profile default dtim-interval 3
	set radio-profile default auto-tune channel-config
	disable
	set radio-profile default active-scan disable
	set radio-profile default qos-mode svp
	set dap 1 serial-id stpw20kc3 model 2330
	set dap 1 name WAP-2330-2
	set dap 1 radio 1 channel 11 tx-power 10 mode enable
	set dap 1 radio 2 channel 40 tx-power 10 mode enable
	set port type ap 1 model 2330 poe enable
38	PN: 1725-36082-001_F.doc