Nortel: WLAN Security Switch 2300 Series with
Configuration Example –
WLAN Management Software
Adding a WLAN Security Switch to the Network Plan
Before WLAN Management Software can be used to configure a
WLAN Security Switch, the WSS must be added to the WMS server.
To add a WLAN Security Switch to WLAN Management Software:
1.Assuming that WMS is installed and a Network Plan has been created, launch the WMS client and connect to the WMS server. For more information, see the Nortel WLAN Management Software 2300 Series User Guide.
2.In WMS, click Configuration on the tool bar.
3.In the Network Plan Tasks panel, under Other select Upload WSS.
4.In the IP Address field, type the IP address for the WLAN Security Switch.
PN: | 15 |
