Polycom 2300 VLAN configuration

Configuration Guide

PN: 1725-36082-001_F.doc

VLAN configuration

For security and flexibility it is recommended that voice and data be

on separate VLANs. For this example, a new VLAN named Voice with

a VLAN ID 2 will be created and tagged to the uplink port 8.

1. In WMS click Configuration on the tool bar.

2. In the Organizer panel, expand the WSS and select VLANs.

3. In the Network Plan Tasks panel, select Create VLAN.

Contents

Main Trademark Information Patent Information Copyright Notice Notice Contact Information Introduction Certified Product Summary Service Information Contacting Nortel Technical Support Known Limitations Network Topology Access Point Capacity and Positioning Handset range Number of handset calls per AP LAN bandwidth WLAN bandwidth Configuring a New WLAN Security Switch Starting from Factory Defaults Connecting APs Directly connected APs Distributed APs Command, comment, and screen text key Configuration Example CLI AP configuration VLAN configuration Service profile / SSID configuration Radio Profile configuration Access control list Saving changes Configuration Example WLAN Management Software Adding a WLAN Security Switch to the Network Plan AP configuration Page Page Page VLAN configuration Page Page Service Profile / SSID configuration Page Page Page Page Page Page Page Radio Profile configuration Page Page Page Deploying changes Page Example Configuration Files (For Reference Only)