Assembling Your Polycom CX200 Desktop Phone

Getting Started with Your Polycom® CX200 Desktop Phone

This section describes how to assemble your Polycom CX200 desktop phone:

•Connect handset and headset (optional)

•Connect the Polycom CX200 to your computer

If your phone is already assembled and connected to your computer, go directly to Features of Your Polycom CX200 Desktop Phone on page 1-4.

Connecting the Handset and Optional Headset

To connect the handset and optional headset:

1.Connect one end of the phone cord to the handset and the other end of the cord to the handset jack on the back of the phone.

2.Connect the headset (optional) to the headset jack on the back of the phone.

A list of supported headsets is available in the Voice section of Polycom’s Support web site at http://www.polycom.com/support/voice/.

Note	If headsets are deployed in high static environments where users frequently
	disconnect and re-connect the headset to the phone, it is possible that the phone
	can be damaged by electrostatic discharge (ESD).
	You should take precautions to avoid excessive static buildup in your environment.
	This can include humidity control and removal of synthetic materials near the phone
	location. Antistatic spray applied to carpets in the workplace can reduce the level of
	static buildup.

1 - 3