Polycom IP 7000 manual Upgrading the Phone’s Software

Models: IP 7000

1 32
Download 32 pages 23.78 Kb
Page 16
Image 16

Integration Guide for the Polycom SoundStation IP 7000 Phone Connected to a Polycom HDX System in Unsupported VoIP Environments

To connect audio from a computer calling application:

>>Connect one end (the end with two connectors) of the Computer Calling Cable (contained in the optional Computer Calling Kit) to the audio out and microphone ports on a computer, and connect the other end to the 2.5mm audio connector on the phone.

For information on using the phone with a computer calling application, refer to the section “Using Computer or Mobile Audio with the Conference Phone” in the User Guide for the SoundStation IP 7000 Phone.

Upgrading the Phone’s Software

The SoundPoint IP 7000 phone must be running bootROM 4.1.2 or later and

SIP application 3.1.1 or later before you connect it to a Polycom HDX system.

To upgrade the phone’s software, you will need to do one of the following:

Use the Polycom Customer Support provisioning server to provision the phone. Refer to Using the Polycom Customer Support Provisioning Server on page 10.

Set up a provisioning server on your network and use it to provision the phone. To do this, you must:

Download the latest SIP application from the Polycom Support web site. Refer to Locating the Latest Software on page 13.

Set up a provisioning server. Refer to Setting Up a Provisioning Server on page 13.

Download the new SIP application to the phone. Refer to Downloading New Software to the Phone on page 14.

For more information on upgrading the SIP application, refer to section “Upgrading the SIP Application” in the latest SIP Administrator’s Guide at http://www.polycom.com/support/voicedocumentation/ .

Using the Polycom Customer Support Provisioning Server

To use the Polycom Customer Support provisioning server to download the phone, you must change the default network configuration parameters on the SoundPoint IP 7000 phone.

Note

The phone must be connected to the local area network to provision the new

 

software to the phone. Refer to Connecting the Phone to the Network on page 4.

 

 

10

Page 16
Image 16
Polycom IP 7000 manual Upgrading the Phone’s Software, Using the Polycom Customer Support Provisioning Server