Polycom se200 manual ReadiManager Software Setup, Log into the ReadiManager System

2

ReadiManager® Software Setup

This chapter describes the ReadiManager® software setup tasks.

Note

If you are installing a redundant ReadiManager system configuration, perform all of the procedures in this chapter on both ReadiManager SE200 appliances.

Log into the ReadiManager System

To log into the ReadiManager system, you need:

•An internet browser

•Adobe® Flash® Player 9.x

•The IP address of the ReadiManager SE200 network appliance. See the First-Time Setup Worksheet (Table 1-1on page 1-2).

Note

The ReadiManager user interface is best viewed with an SXGA display resolution of at least 1280x1024 pixels. The minimum support display resolution is XGA 1024x768 pixels.

To log into the ReadiManager system

1Open a browser window and in the Address field enter the ReadiManager SE200 appliance IP address.

If prompted to install the Adobe Flash Player, click OK.

Polycom, Inc. 2-1