Polycom, Inc. 1-1
1
ReadiManager® System Setup
This chapter describes the steps to set up a ReadiManager® SE200 network
appliance and connect it to the network.

Collect Necessary Materials

Before you install a ReadiManager SE200 appliance, collect these materials:
•ReadiManager SE200 shipment
•Completed Site Survey and First-Time Setup Worksheet
•Computer with a serial or ethernet port
To connect to the ReadiManager SE200 appliance through an ethernet port,
make sure you also have:
•A crossover cable OR
•A hub or a switch and two ethernet cables
Note
If you are installing a redundant ReadiManager system configuration, perform all of
the procedures in this chapter on both ReadiManager SE200 appliances.