Driving and Operating 8-29

Tire and Loading Information Label

Label Example

A vehicle specific Tire and Loading Information label is attached to the vehicle’s center pillar (B-pillar). With the driver’s door open, you will find the label attached near the door lock post. The Tire and Loading Information label shows the

number of occupant seating positions (A), and the maximum vehicle capacity weight (B) in kilograms and pounds.

The Tire and Loading Information label also shows the tire size of the original equipment tires (C) and the recommended cold tire inflation pressures (D). For more information on tires and inflation see Tires on page 9-39and Inflation - Tire Pressure on page 9-46.

There is also important loading information on the Certification label. It tells you the Gross Vehicle Weight Rating (GVWR) and the Gross Axle Weight Rating (GAWR) for the front and rear axle. See “Certification Label” later in this section.

Steps for Determining Correct Load Limit

1.Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs” on your vehicle placard.

2.Determine the combined weight of the driver and passengers that will be riding in your vehicle.

3.Subtract the combined weight of the driver and passengers from XXX kg or XXX lbs.

4.The resulting figure equals the available amount of cargo and luggage load capacity. For example,

if the “XXX” amount equals 1400 lbs and there will

be five 150 lb passengers in your vehicle, the amount of available cargo and

luggage load capacity is 650 lbs (1400 − 750

(5 x 150) = 650 lbs).

Page 177
Image 177
Pontiac G8 manual Tire and Loading Information Label, Steps for Determining Correct Load Limit, Label Example