9-32 Vehicle Service and Care

9.Push the new bulb into the socket and turn it clockwise to lock it into place.

10.Push the bulb socket straight in and turn it clockwise to lock it into place.

11.Make sure the seals are applied to the taillamp assembly and screws.

12.Raise the spare tire cover.

13.Turn the trunk lining securing pins clockwise to lock into place.

14.Return the plastic trunk trim to its original location.

15.Reinstall the plastic retaining pins.

Replacement Bulbs

Exterior Lamp

Bulb

Number

 

High-Beam

H9

Headlamp

 

Low-Beam

H11

Headlamp

 

Stoplamp/Taillamp

P21/5W

Rear Turn

PY21W

Signal Lamp

 

Back-up Lamp

P21W

For replacement bulbs not listed here, contact your dealer/retailer.

Electrical System

Add-On Electrical

Equipment

Notice: Do not add anything electrical to your vehicle unless you check with your dealer/retailer first. Some electrical equipment can damage your vehicle and the damage would not be covered by your warranty. Some add-on electrical equipment can keep other components from working as they should.

Add-on equipment can drain your vehicle’s battery, even if your vehicle is not operating.

Your vehicle has an airbag system. Before attempting to add anything electrical to your vehicle, see Servicing Your Airbag-Equipped Vehicle on page 1-30.

Page 216
Image 216
Pontiac G8 manual Electrical System, Replacement Bulbs, Add-On Electrical Equipment, Exterior Lamp Bulb Number