13.DON T OVERREACH. Keep proper footing and balance at all times.
14.MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories. Inspect tool cords periodically and if damaged, have repaired by authorized service facility. Inspect extension cords periodically and replace if damaged. Have all worn, broken or lost parts replaced immediately. Keep handles dry, clean and free from oil and grease.
15.DISCONNECT TOOLS when not in use, before servicing, and when changing accessories such as blades, bits, cutters, etc.
16.REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from the tool before turning it on.
17.AVOID UNINTENTIONAL STARTING. Do not carry a
18.OUTDOOR USE EXTENSION CORDS. When tool is used outdoors, use
only extension cords marked Suitable for use with outdoor appliances store indoors when not in use.
19.STAY ALERT. Watch what you are doing. Use common sense. Do not operate tool when you are tired or while under the influence of medication, alcohol or drugs.
20.USE RECOMMENDED ACCESSORIES. Consult the owner s manual for recommended accessories. The use of improper accessories may cause risk of injury to persons.
21.NEVER STAND ON TOOL. Serious injury could occur if the tool is tipped or if the cutting tool is unintentionally contacted.
22.CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced.
23.DIRECTION OF FEED. Feed work into a blade or cutter against the direction of rotation of the blade or cutter only.
24.NEVER LEAVE TOOL RUNNING UNATTENDED. TURN POWER OFF. Don t leave tool until it comes to a complete stop.
25.WEAR EAR PROTECTION to safeguard against possible hearing loss.
SAVE THESE INSTRUCTIONS
ADDITIONAL SAFETY RULES FOR ROUTER/SHAPER
1.DO NOT USE awkward hand positions.
2. KEEP FINGERS AWAY from revolving cutter use fixtures when necessary.
3.USE CUTTER GUARDS for all applications.
4.KEEP CUTTER GUARDS IN PLACE and in working order.
5.KEEP CUTTERS SHARP.
4
