Porter-Cable H1000IS-W instruction manual Failure to properly position skyhook

5.Place skyhook on the fuel tank side of the frame and install upper bracket as shown.

6.Wrap upper bracket around frame.

7.Slide lockwashers onto bolts, insert through brackets, and secure with whizlock nuts. NOTE: DO NOT tighten bolts at this time.

8.Repeat steps 5-7 on other side.

9Position skyhook between arrows on label. NOTE: Bracket should not overlap onto weld.

Failure to properly position skyhook

can cause property damage, serious injury or death, and void the manufacturer’s warranty.

10.Torque four bolts to 11-12 ft.-lbs. (132-144 in.-lbs.)

IMPORTANT: DO NOT substitute hardware when assembling the skyhook.

11.Place tank on frame rails and align holes in tank with holes in frame.

12.Install fuel tank screws and wash- ers. Torque screws to 20-25 inch pounds (hand tight).

13.Open the fuel shut-off valve. Turn counter clockwise until the valve stops.

13- ENG A01296