POSIFLEX Business Machines Posiflex Thermal Printer, PP-7000II Software Commands, Paper out alarm

D. SOFTWARE COMMANDS

The Aura thermal printer supports all commands applicable to Epson printer TM-T88II. The only difference is the smoothening command in enlarged text fonts. Please visit our web site http://www.posiflex.com or http://www.posiflex.com.tw for detail description of the supported commands if required.

1.Paper out alarm

When Paper End signal is detected, the printer keeps on intensive beeping and stops receiving data till the signal is

neutralized. When Paper Near End signal is detected, the printer gives a beep every 3 seconds and stops receiving data.

2.Enhancement commands

Following commands are included in the printer firmware version since ver. 3.2:

ESC ‘o’: Beep command

GS ‘o’ m: Beep definition (0 < m 16, default 3 seconds)

ESC ‘p’ m n1 n2: Cash drawer kick or kitchen bell drive command

GS ‘p’ m n: Beep when cash drawer remain open (0 < m < 256, n = ‘0’ or ‘1’)

Explanations as below:

ESC ‘o’: Beep command

Hexadecimal codes are: 1B 6F

Printer beeps when this command is received per condition set by beep definition.

GS ‘o’ m: Beep definition (0 < m 16, default 3 seconds)

Hexadecimal codes are: 1D 6F m

5 - 5