•Since the paper roll is highly thermal sensitive, please keep them in a dark place that is 20º and 65% RH when not installed in the printer.
•Use a grounded AC power outlet.
•Use only the power cord and power adaptor furnished with the printer.
•Do not use a power outlet of a circuit shared with any equipment that causes great electrical noise, such as motors.
•Do not use a power outlet of a circuit shared with any equipment that uses a lot of power, such as a copier or a coffee maker.
•Do not touch any connector contacts to avoid possible electrostatic damage.
•Do not allow the cut receipt to slide back into the cutter during the operation. As this would lead to multiple cutting at the lower edge of a receipt and the multiple cut thin slips tend to cause mechanical malfunction.
H. USEFUL TIPS
•Do not touch the areas around the print head and motor during or right after printing. It can be very hot.
•Do not use thermal paper containing Sodium (Na+), Potassium (K+) and Chlorine
•Use only water paste, starch paste, polyvinyl paste or CMC paste when gluing thermal paper.
1 - 6