![[6]TV SHAPE:](/images/new-backgrounds/22216/2221637x1.webp)
[6]TV SHAPE:
Set TFT screen mode to the correct ratio:
Three screen ratio modes are available, Normal/PS (4:3 Pan Scan), Normal/LB (4:3 Letterbox) and Wide (16:9). Different disc formats will display different images depending this setting and the screen size used.
[7]NTSC/ PAL:
Select this menu item to set up your preferred video output format. PAL is commonly used in Europe, NTSC is commonly used in the USA and Japan. Auto is commonly used.
[8]DEFAULT:
Factory reset. Set all values to Factory default values including memory and preset stations.
SYSTEM INFORMATION
Press SYSTEM button to show the information of the system. You can view detail system
information including serial number of the software.
CALIBRATION
CALIBRATION of the touch screen.
CALIBRATION screen is described as below.
When the target moves to another position, tap
and hold at the center of the new target. Repeat each time to complete the calibration process. When completed, tap anywhere in screen to go back to menu screen.
Other functions
Subwoofer
Connect the subwoofer to the unit using sub
output (see electrical diagram). Tap MENU on
screen enter into main menu setting choose setting menu. choose SOUND and set subwoofer ON to enable subwoofer.
Parking
When the car is stopped and the parking brake is working, the screen can display the video
image, otherwise the screen can't display the video image
Back View Camera
This unit is equipped with back view camera output. The camera is used to observe the situation behind the vehicle when you are backing the car.
Please connect your back view camera with the back car video input. And connect the reverse
wire for back a car with the rear gear light. Rear view camera picture will be enabled when you are backing the car.
19
