Rev. 1 | |
Operation | CD/CIM25600L.IOM |
3.6.1RESETTING TO FACTORY DEFAULTS
1Enter the following command:
Command: <0/RST=’cr’
Response: >0/RST=
3.6.2CHANGING NETWORK IP ADDRESS
Perform the following steps.
1Enter the following command:
Command: <0/IPA=xxx.xxx.xxx.xxx/yy’cr’
Where x is the IP Address and y is the subnet mask.
Response: >0/IPA=
Example: <0/IPA=192.168.001.002/16’cr’
16 would be a subnet mask of 255.255.0.0
2To query the IP address enter: <0/IPA?’cr’
3.6.3VERIFYING SOFTWARE VERSION
Perform the following:
1Enter the following command:
Command: <0/SWR?’cr’
Response: >0/SWR= 1.0.1’cr’
3.6.4CHANGING MAC ADDRESS
Perform the following:
1Enter the following command:
Command: <0/MAC=xxxxxxxxx’cr’
Where x is the MAC Address as shown on the label of the
Response: >0/MAC=
Example: >0/MAC=006B0000000A’cr’
2To query the MAC Address enter: >0/MAC?’cr’
1. The MAC Address is unique to this unit. Change only under the factory direction or if it does not match the label.
2. Changing the MAC Address to anything other than the factory default, may
IMPORTANT | result in erratic operation. |
|
36
