Mocomtech CiM-25/600L, IP-Enabled M&C operation manual Specifications, Frequency Converter

CiM-25/600L IP Enabled M&C	Rev. 1
Introduction	CD/CIM25600L.IOM

The CiM-25 uses flash technology providing support for a wide variety of products from a single hardware platform. The CiM-25 either currently or will in the near future support the following Comtech EF Data equipment:

Modems

SDM-300L1* SDM-300L2* SDM-300L3 SDM-2020M*

SDM-8000* SDM-300A/SLM-3650* CDM-550T CDM-600*

CDM-600L* SDM-2020D* SDM-9000*

Frequency Converter

UT4500 series 1 kHz and 125 kHz step size Up Converters*

DT4500 series 1 kHz and 125 kHz step size Down Converters*

*Requires an external 5 Vdc Power Supply (universal AC input). See section 2.3.1, Powering the CiM-25.

1.2 SPECIFICATIONS

SYSTEM SPECIFICATIONS

Ethernet Interface	10base T (RJ-45)
Equipment Interface	DB9 Female on CiM-25F
	DB9 Male on CiM-25M
ENVIRONMENTAL AND PHYSICAL
Temperature	Operating: 0 to 50º C
	Storage: -25 to 70º C
Power Supply	4.75 to 5.25 Vdc
Power Consumption	0.9 W typical, 1.5 W maximum
Physical Dimensions	L=110, W=43, H=20 (mm)
	L=4.3, W=1.7, H=0.8 (inches)
Weight	< 1 lbs
CE Approvals	EN55022 Class B (Emissions)
	EN50082-1 Part 1 (Immunity)
	EN60950 (Safety)
FCC Approval	FCC Part 15 Class B

2