Mocomtech CiM-25/600L, IP-Enabled M&C operation manual Name monitor, Security Tools

Models: IP-Enabled M&C CiM-25/600L

1 152
Download 152 pages 48.45 Kb
Page 26
Image 26

CiM-25/600L IP Enabled M&C

Rev. 1

Operation

CD/CIM25600L.IOM

3.2.1SECURITY TOOLS

3.2.1.1USER LOGIN

For the HTTP interfaces the CiM-25 provides three (3) levels of user login. The Telnet interface, provides the first two (2) of the following levels. The highest level is the Administrator login. This level allows 100% complete access to all controllable CiM- 25 and equipment parameters. The next level of user login is the Read/Write level. This level allows access to all controllable equipment parameters but does not allow access to the administration parameters of the CiM-25 itself. The lowest level of login is the Read Only login. As the name implies, this level allows the user to view, but not change, the equipment parameters. Like the Read/Write level, this level does not allow access to the administration parameters of the CiM-25.

The Name and Password factory defaults for the three level defined above are:

Administrator Level:

Name: admin

Password: 1234

Read/Write Level:

Name: opcenter

Password: 1234

Read Only Level:

Name: monitor

Password: 1234

The SNMP interface uses all three (3) levels of user login utilizing the SNMP v2c (community string) method of security. The community string is the concatenation of the name and password, i.e. admin1234, default admin community string.

3.2.1.2HOST ALLOW LIST

The CiM-25 provides a high degree of security by allowing the Administrator to define a list of IP addresses to which the CiM-25 will accept/respond to IP datagrams. The Administrator can select up to six (6) individual allowable IP addresses or up to three (3) allowable IP address ranges or any combination of individual and ranges that can be defined by six fields (see HTTP interface below for further details). The host allow list is applied to all three CiM-25 interfaces (HTTP, SNMP, and Telnet).

3.2.1.3PING ENABLE/DISABLE

The final piece to the CiM-25 security design is the PING Enable/Disable feature. This feature allows the Administrator to disable PING on an individual CiM-25. This in effect conceals the CiM-25 from most hackers.

8

Page 26
Image 26
Mocomtech CiM-25/600L, IP-Enabled M&C operation manual Name monitor, Security Tools