Mocomtech CiM-25/600L, IP-Enabled M&C operation manual Appendix A. CIM-25/600L Snmp Interface

CiM-25/600L IP Enabled M&C			Rev. 1
Preface			CD/CIM25600L.IOM
CHAPTER 3. OPERATION			7
3.1	Overview		7
3.2	Administration and Security		7
3.2.1		Security Tools	8
3.2.2		Network Administration	9
3.3	HTTP Interface		10
3.3.1		Local LAN Configuration	10
3.3.2		Home Page	13
3.3.3		Logoff Page	14
3.3.4		Support Page (Common)	15
3.3.5		Administration Page (Common)	16
3.3.6		Modem Configuration Page (Rx/Tx)	19
3.3.7		Status Page	20
3.3.8		Interface Parameters Page (Tx/Rx)	21
3.3.9		Utilities Page	22
3.3.10		Stored Faults/Alarms	23
3.3.11		External Control	24
3.4	SNMP Interface		25
3.5	Telnet Interface		27
3.5.1		Telnet Administrative Functions	28
3.5.2		Using Telnet with Equipment Remote Control Protocol	34
3.6	Maintenance Interface		35
3.6.1		Resetting to Factory Defaults	36
3.6.2		Changing Network IP Address	36
3.6.3		Verifying Software Version	36
3.6.4		Changing MAC Address	36
3.6.5		Changing Serial Number	37
APPENDIX A. CIM-25/600L SNMP INTERFACE			39
A.1	SNMP Interface		39
A.2	MIB-II		39
A.3	Private MIB Implementations		39
A.4	CiM-25 MIB Tree		40
A.5	CiM-25 MIB		42
A.5.1		iso	42
A.5.2		org	42

iv