Mocomtech IP-Enabled M&C, CiM-25/600L operation manual Unpacking and Inspection, Configuration

Chapter 2. INSTALLATION

Unpacking and Inspection	3
Configuration	3
Connecting CiM-25 To Equipment	4

2.1UNPACKING AND INSPECTION

Inspect shipping containers for damage. If shipping containers are damaged, keep them until the contents of the shipment have been carefully inspected and checked for normal operation.

Remove the packing list from the outside of the shipping carton. Open the carton and remove the contents, checking the contents against the packing list. Verify completeness of the shipment and that the unit functions correctly. If damage is evident, contact the carrier and Comtech EF Data immediately and submit a damage report. Keep all shipping materials for the carrier's inspection.

If the unit needs to be returned to Comtech EF Data, please use the original shipping container.

2.2CONFIGURATION

There are no internal jumpers to configure, no interface cards to install, and no other options to install. All configuration is carried out entirely in software. The unit should first be configured locally, using the RJ-45 Ethernet interface. The unit will ship with a default IP address of 10.6.30.1, Gateway 0.0.0.0, and Mask 255.255.0.0. The default Administrator Name and Password are admin and 1234 respectively. See the operations section for details regarding configuring and administrating the CiM-25.

3