Rev. 1 | |
Operation | CD/CIM25600L.IOM |
3.5.1.14CHANGE HTTP PORT
Using the !PT command, the Administrator can set the HTTP Port. The command protocol for this command is as follows:
Format: | !PT <value> |
Response: | Command Successful |
Where <value> can be any number in the range of 0 to 65535
Query Format: | !PT ? |
Response: | !PT <value> |
Notes: 1. The default port is set to 80.
2.Changes made via this command do not become active until the user has sent a !EE command to commit the changes to EEPROM of the
3.5.1.15CHANGE SNMP TRAP ADDRESS
Using the !TP command, the Administrator can set the SNMP Trap Address. The command protocol for this command is as follows:
Format: !TP <ip_address>
Response: Command Successful
Note: An IP Address of 0.0.0.0 disables the trap
Query Format: !TP ?
Response: !TP <ip_address>
Note: Changes made via this command do not become active until the user has sent a !EE command to commit the changes to EEPROM of the
3.5.1.16CHANGE SNMP TRAP COMMUNITY
Using the !TC command, the Administrator can set the SNMP Trap Community. The command protocol for this command is as follows:
Format: | !TC <string> |
Response: | Command Successful |
where <string> can be 0 - 20 characters
Query Format: | !TC ? |
Response: | !TC <string> |
Note: Changes made via this command do not become active until the user has sent a !EE command to commit the changes to EEPROM of the
33
