Rev. 1 | |
Operation | CD/CIM25600L.IOM |
3.5.1.2CHANGE HOST ALLOW LIST
Using the !HA command, the Administrator can modify the Host Allow List. The command protocol for this command is as follows:
Format: | !HA <address index> <ip_address> <ranged> |
Where: | address index is 1 to 6, ranged is 0 if No and 1 if yes |
Example: !HA 5 10.50.91.200 0
This sets IP address #5 to 10.50.91.200 and indicates addresses #5 & #6 are NOT ranged.
Query Format: !HA ? |
|
| |
Response: | IP 1: 000.000.000.000 | IP 2: 255.255.255.255 | Range = yes |
| IP 3: 000.000.000.000 | IP 4: 000.000.000.000 | Range = no |
| IP 5: 000.000.000.000 | IP 6: 000.000.000.000 | Range = no |
Note: | Changes made via this command do not become active until the user has sent a !EE | ||
| command to commit the changes to EEPROM of the |
|
3.5.1.3CHANGE ADMINISTRATOR NAME
Using the !AD command, the Administrator can change the Administrator login Name. The command protocol for this command is as follows:
Format: |
| !AD <string> |
Where: |
| <string> can be any alphanumeric string of length 4 to 10 characters |
Query Format: | !AD ? | |
Response: |
| !AD <string> |
Note: | Changes made via this command do not become active until the user has sent a !EE | |
| command to commit the changes to EEPROM of the |
3.5.1.4CHANGE ADMINISTRATOR PASSWORD
Using the !PW command, the Administrator can change the Administrator login Password. The command protocol for this command is as follows:
Format: |
| !PW <string> |
Where: |
| <string> can be any alphanumeric string of length 4 to 10 characters |
Query Format: | !PW ? | |
Response: |
| !PW <string> |
Note: | Changes made via this command do not become active until the user has sent a !EE | |
| command to commit the changes to EEPROM of the |
29