Mocomtech IP-Enabled M&C, CiM-25/600L operation manual RP string

CiM-25/600L IP Enabled M&C	Rev. 1
Operation	CD/CIM25600L.IOM

3.5.1.8CHANGE READ ONLY PASSWORD

Using the !RP command, the Administrator can change the Read/Only login Password. The command protocol for this command is as follows:

Format:		!RP <string>
Where:		<string> can be any alphanumeric string of length 4 to 10 characters
Query Format:		!RP ?
Response:		!RP <string>
Note:	Changes made via this command do not become active until the user has sent a !EE
	command to commit the changes to EEPROM of the CiM-25.

3.5.1.9ENABLE OR DISABLE PING

Using the !PG command, the Administrator can either enable or disable PING. The command protocol for this command is as follows:

Format:		!PG <state>
Where:		0 = Disabled, 1 = Enabled
Query Format:		!PG ?
Response:		!PG <state>
Note:	Changes made via this command do not become active until the user has sent a !EE
	command to commit the changes to EEPROM of the CiM-25.

3.5.1.10COMMIT CHANGES TO EEPROM

Using the !EE command, the Administrator can commit any previously commanded changes to EEPROM. This will store the new operating parameters and automatically do a warm reboot of the CiM-25/600L. The command protocol for this command is as follows:

Format: !EE

31