Rev. 1 | |
Operation | CD/CIM25600L.IOM |
3.3.5.3READ ONLY NAME AND PASSWORD
The factory defaults for these parameters are monitor and 1234 respectively. The Name field can be any
3.3.5.4HOST ALLOW LIST
The Host Allow List can be configured as any of the following combinations:
1 to 6 individual IP addresses.
1 to 3 ranges of IP addresses.
A combination of individual and range addresses.
The Administrator simply checks the Range Yes radio button next to the group of two IP addresses that constitute the beginning and ending of the range.
3.3.5.5PING ENABLE / DISABLE
The factory defaults for this parameter is Enabled. The radio buttons allow the Administrator to choose between Enabled and Disabled.
3.3.5.6
The factory defaults for these parameters are 10.6.30.1, 0.0.0.0, and 255.255.0.0 respectively. The Administrator can change these as required.
3.3.5.7DNS SERVERS
The Administrator can assign both a primary and secondary DNS server IP address.
3.3.5.8SMTP DOMAIN NAME AND IP ADDRESS
The Administrator can assign the SMTP Domain Name and Domain IP Address. This is required if the
3.3.5.9SNMP TRAP IP ADDRESS
The Administrator can assign a SNMP Trap IP address.
17
