PowerFile C200 Important Safety Information, PowerFile, Operators Safety Summary, Power Source

Models: C200

1 26
Download 26 pages 38.83 Kb
Page 3
Image 3
PowerFile

PowerFile

Safety Information

 

 

Important Safety Information

Operators Safety Summary

The safety information in this summary is for installation and operating personnel. Warnings and cautions can also be found throughout the manual where they apply.

Power Source

Please refer to the PowerFile Specifications section before powering-on your PowerFile product.

Grounding the PowerFile

This product is grounded through the ground conductor of the power cord. To avoid the possibility of electrical shock, plug the power cord into a properly wired and grounded receptacle before operating the PowerFile. A protective ground connection, by way of the ground conductor in the power cord, is essential for safe operation. A standard 3-pin IEC-type and in good operational condition is the only acceptable cord that may be used to connect the PowerFile to a power source.

Do Not Use Extension Cords

To avoid safety hazards, use only the power cord (or similar) that was supplied with your unit. We do not recommend that extension cords be used with this product. As with all electrical devices, do not run power cords under rugs or carpets or place heavy objects on them. Damaged power cords should be replaced immediately with cords meeting factory specifications.

Handle the AC Power Cord Gently

When disconnecting the power cord from an AC outlet, always pull the plug, never the cord. If you do not intend to use the unit for any considerable length of time, disconnect the plug from the AC outlet.

Removal of the PowerFile Cover or Front Panel

To avoid personal injury and to ensure proper operation, do not remove the PowerFile top cover, bottom cover or front panel. Removal of the bottom cover will void the warranty. Do not operate this unit without the covers and panels properly installed.

CAUTION!

The C200, R200 and R200S are Class 1 laser products. The visible laser beam could cause hazardous radiation exposure if misdirected. Be sure to operate this player in accordance with the instructions in this manual. Please read this Owners Manual carefully and retain it for future reference.

To prevent direct exposure to the laser beam, do not open the cabinet enclosure or defeat any of the safety mechanisms. DO NOT STARE INTO THE LASER BEAM OR PLACE YOUR EYES CLOSE TO THE OPENING OF THE DISC TRAY OR OTHER OPENINGS TO LOOK INSIDE THE PLAYER.

Important Information for the User

This equipment has been tested and found to comply with the limits for a Class-A digital device, pursuant to Part 15 of the FCC Rules, and is for commercial use only. The limits are designed to provide reasonable protection against harmful interference in a commercial installation. This equipment can generate and radiate radio-frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that harmful interference will not occur in a particular installation. If

PowerFile MFX User Guide

3

Page 3
Image 3
PowerFile C200 manual Important Safety Information, Operators Safety Summary, Power Source, Grounding the PowerFile