Powermatic 15HH operating instructions Features Specifications

Features

Figure 1

Specifications

Model Number		15S	15HH
Stock Number		1791210	1791213
Maximum Cutting Width (in.)		14-7/8	14-7/8
Maximum Cutting Thickness (in.)		6	6
Full Width Cutting Depth (in.)		1/8	1/8
Minimum Planing Length (in.)		8	8
Minimum Stock Thickness (in.)		3/16	3/16
Table movement per one revolution of handwheel		0.079” (2mm)	0.079” (2mm)
Knives		3	74 four-sided inserts
Number of cutterhead rows		--	5
Cutterhead Speed (RPM)		4,500	4,500
Cuts per Minute		13,500	not applicable
Cutterhead Diameter (in.)		2-7/8	2-7/8
Sound Rating @ 2” distance (dB)		82 to 85	80 to 84
Knife Insert Screw Max. Torque (pound force–inch)		-----	45 to 55
Feed Rate (FPM)		16 and 20	16 and 20
Motor	TEFC,3HP,1Ph,230V,60Hz,15A		TEFC,3HP,1Ph,230V,60Hz,15A
Recommended circuit1		30A	30A
Dust Chute Diameter (in.)		4	4
Overall Dimensions, Assembled (LxWxH)(in.)		48 x 28 x 43-1/2	48 x 28 x 43-1/2
Cabinet Footprint, including foot pedal (LxW)(in.)		23-1/2 x 23	23-1/2 x 23
Net Weight (lbs.)		507	502
Shipping Weight (lbs.)		573	568

1Subject to local and national electrical codes

The above specifications were current at the time this manual was published, but because of our policy of continuous improvement, Powermatic reserves the right to change specifications at any time and without prior notice, without incurring obligations.

6