Powermatic 64B subject to local and national electrical codes 2 blade not included

Motor and Electricals:
Motor type	totally enclosed fan cooled, induction, capacitor start
Horsepower	1-3/4 HP (1.3 kW)
Phase	single
Voltage	115/230V (prewired 115V)
Cycle	60 Hz
Motor speed	3450 RPM
Listed FLA (full load amps)	15/7.5 A
Starting amps	52A
Running amps (no load)	6A
Start capacitor	400MFD 125VAC
Run capacitor	30μF 250V
Power transfer	v-belt
On/off switch	manual industrial-style, with padlock hole
Power cord length	7 ft. (213cm)
Power plug installed	yes
Recommended circuit size1	30A (for 115V) or 20A (for 230V)
Noise emission:
Without load	78 dB at 20 inches from blade
With load	85 dB at 20 inches from blade
Arbor and blade:
Blade Diameter2 (in.)	10” (254mm)
Arbor Diameter (in.)	5/8” (16mm)
Arbor speed	3800 RPM
Arbor lock	yes
Maximum cut depth at 90 degrees	3-1/8” (79mm)
Maximum cut depth at 45 degrees	2-1/8” (54mm)
Maximum rip to right of blade	30” (762mm) or 50” (1270mm)
Maximum rip to left of blade	12” (305mm)
Dado maximum width	13/16” (20.7mm
Dado maximum diameter	8” (200mm)
Blade height per one revolution of handwheel	5/32” (4mm) for 90°; 1/8” (2.9mm) for 45°
Blade tilt	left, 0 to 45°
Table:
Table working surface	20-1/8” L x 27” W (511 x 686mm)
Table working surface, with extensions	44-1/4” L x 27” W (1124 x 686mm)
Table working surface, with extensions and optional wood table:
With 30” rip capacity	71-1/4” L x 27” W (1810 x 686mm)
With 50” rip capacity	79-5/8” L x 27” W (2022 x 686mm)
Table area in front of blade at maximum height	11-1/2” (292mm)
Table height from floor	36” (914mm)
Miter slot	two T-slots, 3/4" W x 3/8” D (19 x 10mm)
Edge bevel	front
Dust collection:
Dust port outside diameter	4” (100mm)
Minimum extraction volume required	350 cfm (9.9 cmm)
Other:
Stand style	open
Stand footprint	21-1/2”L x24”W (546 x 610mm)
Overall Dimensions, shipping carton (basic saw only)	39” L x 25” W x 22” H (98.6 x 63.6 x 56.4cm)
Overall Dimensions, fully assembled, accessories mounted:
With 30” rip capacity	71-1/4” L x 43” W x 42” H (181 x 109 x 107cm)
With 50” rip capacity	79-5/8” L x 43” W x 42” H (202 x 109 x 107cm)
Weights:
Net	293 lb (133 kg)
Shipping	304 lb (138 kg)

1subject to local and national electrical codes.

2blade not included.

9