3.Mount front rail (A, Fig. 14) to the band saw table using two M6 x 20 hex cap screws, two 1/4" lock washers and two 1/4" flat washers (B, Fig. 14). Do not tighten yet.
4.Mount guide rail (A, Fig. 15) to the front rail using three M6 x 20 hex cap screws, three 1/4" lock washers and three 1/4" flat washers. Tighten the screws to secure the guide rail to the front fence.
5.Attach the fence to the fence body using four hex cap screws, four lock washers and four flat washers (A, Fig. 16). Tighten the screws. Lift up on the fence handle and set the fence assembly onto the table and guide rail.
17
